Firmware for Matrix 1S Brushless Flight Controller

Basic firmware: BETAFPVG473 4.5.0

VTX default frequency: R1 5658Mhz

VTX default power: 25mW

Receiver firmware version: ELRS V3.4.3

ESC firmware version: Bluejay V0.19.2

Gyroscope & maximum sampling rate:  ICM42688P, 8KHz

Note:

1. The VTX antenna must be installed when the FC is powered on, otherwise the VTX chip may be burned.
2. Receiver binding method: Power on and off three times within 5 seconds. The LED light on the front end of the flight controller (printed with BETAFPV silk screen) flashes green twice quickly to indicate the binding state.

Please kindly download the following firmware.

Matrix 1S Brushless V1.0 20241101.hex