Download the CLI dump file and firmware for Cetus X.
This CLI dump file and firmware are used for Cetus X (Betaflight version) whose FC is F4 1S 12A.
No need to flash configuration firmware (including CLI configuration)
BF4SX1280 4.3.1_Cetus X_A_ELRS V2.2_ELRS_20230712.hex
CLI for quadcopter (Do not need to be flashed separately):
Comments
11 comments
Hi, I cant bind my Cetus X and it is in constant binding mode(Green light wont stop flashing fast) and wont stop no matter what. I recently flashed it to Betaflight 4.4.0 It connects and everything in Betaflight works and seems normal.
Same problem Cetus X Betaflight ERLS + LiteRadio 3
same problem with Cetus X Betaflight ERLS + LiteRadio 3
Solved by flashing 4.3.1 firmware using 10.8.0 BetaFlight configurator. Other firmware and betaflight version combinations didn't work for me.
after flashing 4.3.1 firmware cannot see gyro
Do not use other BetaFlight versions, only 10.8.0. After flashing 4.3.1 with BetaFlight 10.9.0 I also had gyro missing.
Thank you! It's works! You saved me a night for sleep)
I can't bind my rx too. I use BT 10.8.0 to flash 4.3.1 but still cannot connect rx to my zorro tx
Hi i have a problem with connection my Cetus with PC. The device is not detected
I'm having also a connection problem.
My Story:
I ordered a new drone ('cause my last crashed) and after unboxing the controller could not bind to the drone. My headcam can connect to the drone (I see the picture through the drone) but neither the binding process from controller to drone and the connection of the drone to betaflight on my mac does not work.
Informations:
1. In binding mode, the drone keeps blinking green and fast. After some minutes it beeps to tell me the connection is lost.
2. After installing the serial com port drivers on my mac, the connection via betaflight established, but closes max. 10 seconds after.
Environment: Apple M1 Max, MacOS 13.4.1 (c) (22F770820d).
It feels like a hardware bug.
Going to sleep now - spend a while day for it. Very frustrating...
Thank you so much Ihor Porokhnia... I spent all weekend looking into how to get my Cetus x reconnected to the receiver. I tried using 4.3.1 but I was using latest betaflight... I installed BT 10.8.0 and then flashed to 4.3.1 and finally it got working again. Thanks so much!
Please sign in to leave a comment.