Skip to main content

Firmware and CLI for Cetus X Betaflight Version (F4 1S 12A FC)

Submit a request

Comments

11 comments

  • Ihor Porokhnia

    Solved by flashing 4.3.1 firmware using 10.8.0 BetaFlight configurator. Other firmware and betaflight version combinations didn't work for me.

    1
  • Ihor Porokhnia

    Do not use other BetaFlight versions, only 10.8.0. After flashing 4.3.1 with BetaFlight 10.9.0 I also had gyro missing.

    1
  • Anton

    Thank you! It's works! You saved me a night for sleep)

    0
  • Thanh

    I can't bind my rx too. I use BT 10.8.0 to flash 4.3.1 but still cannot connect rx to my zorro tx

    0
  • Ulli

    I'm having also a connection problem.

    My Story:
    I ordered a new drone ('cause my last crashed) and after unboxing the controller could not bind to the drone. My headcam can connect to the drone (I see the picture through the drone) but neither the binding process from controller to drone and the connection of the drone to betaflight on my mac does not work.

    Informations:
    1. In binding mode, the drone keeps blinking green and fast. After some minutes it beeps to tell me the connection is lost.
    2. After installing the serial com port drivers on my mac, the connection via betaflight established, but closes max. 10 seconds after.

    Environment: Apple M1 Max, MacOS 13.4.1 (c) (22F770820d).

    It feels like a hardware bug.
    Going to sleep now - spend a while day for it. Very frustrating...

    0
  • Ihor Porokhnia

    Same problem Cetus X Betaflight  ERLS + LiteRadio 3

    0
  • Anton

    after flashing 4.3.1 firmware cannot see gyro

    0
  • Eric Lee

    Hi, I cant bind my Cetus X and it is in constant binding mode(Green light wont stop flashing fast) and wont stop no matter what. I recently flashed it to Betaflight 4.4.0 It connects and everything in Betaflight works and seems normal.

    0
  • Anton

    same problem with Cetus X Betaflight  ERLS + LiteRadio 3

    0
  • Simon Grech

    Thank you so much Ihor Porokhnia... I spent all weekend looking into how to get my Cetus x reconnected to the receiver. I tried using 4.3.1 but I was using latest betaflight... I installed BT 10.8.0 and then flashed to 4.3.1 and finally it got working again. Thanks so much!

    0
  • Martintoha

    Hi i have a problem with connection my Cetus with PC. The device is not detected

    0

Please sign in to leave a comment.