CLI for Cetus X Betaflight Version (F4 1S 12A FC)

• 

  Eric Lee

  • March 07, 2023 19:13

  Hi, I cant bind my Cetus X and it is in constant binding mode(Green light wont stop flashing fast) and wont stop no matter what. I recently flashed it to Betaflight 4.4.0 It connects and everything in Betaflight works and seems normal.

  0
• 

  Ihor Porokhnia

  • March 21, 2023 15:09

  Same problem Cetus X Betaflight  ERLS + LiteRadio 3

  0
• 

  Anton

  • March 30, 2023 17:54

  same problem with Cetus X Betaflight  ERLS + LiteRadio 3

  0
• 

  Ihor Porokhnia

  • March 30, 2023 18:00
  • Edited

  Solved by flashing 4.3.1 firmware using 10.8.0 BetaFlight configurator. Other firmware and betaflight version combinations didn't work for me.

  1
• 

  Anton

  • March 30, 2023 20:41

  after flashing 4.3.1 firmware cannot see gyro

  0
• 

  Ihor Porokhnia

  • March 30, 2023 20:44

  Do not use other BetaFlight versions, only 10.8.0. After flashing 4.3.1 with BetaFlight 10.9.0 I also had gyro missing.

  1
• 

  Anton

  • March 30, 2023 21:07

  Thank you! It's works! You saved me a night for sleep)

  0
• 

  Thanh

  • May 14, 2023 01:45

  I can't bind my rx too. I use BT 10.8.0 to flash 4.3.1 but still cannot connect rx to my zorro tx

  0
• 

  Martintoha

  • July 08, 2023 05:27
  • Edited

  Hi i have a problem with connection my Cetus with PC. The device is not detected

  0
• 

  Ulli

  • July 20, 2023 22:05

  I'm having also a connection problem.

  My Story:
  I ordered a new drone ('cause my last crashed) and after unboxing the controller could not bind to the drone. My headcam can connect to the drone (I see the picture through the drone) but neither the binding process from controller to drone and the connection of the drone to betaflight on my mac does not work.

  Informations:
  1. In binding mode, the drone keeps blinking green and fast. After some minutes it beeps to tell me the connection is lost.
  2. After installing the serial com port drivers on my mac, the connection via betaflight established, but closes max. 10 seconds after.

  Environment: Apple M1 Max, MacOS 13.4.1 (c) (22F770820d).

  It feels like a hardware bug.
  Going to sleep now - spend a while day for it. Very frustrating...

  0
• 

  Simon Grech

  • September 17, 2023 22:01

  Thank you so much Ihor Porokhnia... I spent all weekend looking into how to get my Cetus x reconnected to the receiver. I tried using 4.3.1 but I was using latest betaflight... I installed BT 10.8.0 and then flashed to 4.3.1 and finally it got working again. Thanks so much!

  0

Please sign in to leave a comment.