Antony
- Total activity 91
- Last activity
- Member since
- Following 0 users
- Followed by 5 users
- Votes 2
- Subscriptions 46
Articles
Recent activity by Antony-
How to change the wires of gimbals in LiteRadio 3
If you have encountered the jitter of gimbal during your using the Lite Radio3, even the value of your gimbal jumped sharply when connecting the controller to the BETAFPV configurator: It could be...
-
LiteRadio 1
Please check the attachments to get the firmware files for LiteRadio 1. Note: The file name including CC2500 is the firmware for Frsky version transmitter. LiteRadio_1_CC2500_2.0.1(220905).bin Impo...
-
CLI and Firmware for Pavo20 Pro (F405 2-3S 20A V1.0 FC)
Basic firmware: BETAFPVF405 4.5.0 Please kindly download the attached firmware and CLI which are used for the version of DJI O4 Pro, DJI O3, Vista. Note: We've customized the button functions on...
-
CLI for F405 2-4S 20A Toothpick Brushless Flight Controller V4 (BMI270)
Note: Now the officially released firmware in Betaflight does not support Toothpick F405 2-4S AIO Brushless Flight Controller 20A V4（BMI270), so please use the following firmware and corresponding ...
-
Firmware for Air Brushless Flight Controller
Note: It is recommended to use BETAFLIGHT version 10.10.0 parameter adjustment software. Air FC G4 V1 4IN1 and Air FC G4 V1 5IN1 use the same firmware. Basic firmware : BETAFLIGHT 4.5.0 Gyro : I...
-
CLI for Meteor75 (HD Digital VTX 2022)
The two versions (Walksnail & HDZero) of the firmware contain corresponding CLI file respectively. Please kindly find it from the attachments.
-
CLI for F411 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S(BMI270)
The CLI BETAFPVF411 BF4.3.1.hex contains the default configuration below, Default Configuration It needs to add the BTFL_CLI_BETAFPVF411.txt if the firmware is installed through BETAFLIGHT Config...
-
How to use Expresslrs Recovery Dongle
The general method to flash the ELRS receiver is WiFi or FC passthrough，however, it will lead to the loss of the bootloader and fail to recover, you can use the Expresslrs Recovery Dongle to flash ...
-
Manual for Cetus Pro FPV Kit
Please kindly check and download the attached User Manual & Quick Start Guide for Cetus Pro FPV Kit.
-
CLI for Pavo 360
This CLI can be used for F722 AIO 35A FC which is fit for Betaflight_4.2.X_BETAFPVF722 FC firmware.