Antony
- Total activity 91
- Last activity
- Member since
- Following 0 users
- Followed by 5 users
- Votes 2
- Subscriptions 46
Articles
Recent activity by Antony-
The base and surface shell for Module Adapter
-
How to Bind with F4 Betaflight FC (SPI ExpressLRS Receiver)
Here is the binding procedure for the F4 Betaflight FC (SPI ExpressLRS Receiver) This binding procedure could be used for the ELRS F4 1S 5A AIO FC and F4 1S 12A AIO V2.0 FC Binding Procedure There ...
-
Manual for Pavo20 Pro NightFire RGB Control Board
Please kindly check and download the attached User Manual for Pavo20 Pro NightFire RGB Control Board.
-
CLI for Toothpick F722 2-6S AIO Brushless Flight Controller 35A(ICM42688)
FC firmware suitable for USB flashing betaflight_4.3.0_STM32F7X2 Note: This is the official version of Betaflight 4.3.0, which needs to be used with the default CLI BTFL_cli_BETAFPVF722_ICM42688...
-
LiteRadio 3 Pro
Please check the attachments to get the firmware files for LiteRadio 3 Pro.
-
Manual for LiteRadio 3 Pro
Please see the attachment to download the User Manual for LiteRadio 3 Pro Radio Transmitter.
-
CLI and Firmware for Pavo Femto (F405 2-3S 20A ELRS FC)
Basic firmware: BETAFPVF405 4.5.0 Receiver firmware version: ELRS V3.3.0 ESC firmware version: Bluejay C-X-70 0.19.2 48KHz Note: It is recommended to use BETAFLIGHT version 10.10.0 parameter adju...
-
CLI for Toothpick F722 2-6S AIO Brushless Flight Controller 35A(BMI270)
Note: Now the officially released firmware in Betaflight does not support Toothpick F722 2-6S AIO Brushless Flight Controller 35A(BMI270), so please use the following firmware and corresponding con...
-
How to flash the firmware for LiteRadio 3 Pro (ELRS 2.4 version)
Firmware Update Steps The stock firmware of the Lite Radio3 Pro manufactured by our company is ELRS V2.2.0, which could bind with the ELRS receiver and SPI FC from our company. There are two method...
-
CLI and Firmware for Pavo20 Pro NightFire (F405 2-3S 20A V1.0 FC)
Basic firmware: BETAFPVF405 4.5.0 Both DJI O3 and Vista versions use unified CLI and firmware. If you need to use a DJI remote controller to control the aircraft, please flash the SBUS protocol fi...