Antony
- Total activity 115
- Last activity
- Member since
- Following 0 users
- Followed by 6 users
- Votes 2
- Subscriptions 47
Articles
Recent activity by Antony-
Firmware for Matrix 1S Brushless Flight Controller (5IN1)
Basic firmware: BETAFPVG473 4.5.0 VTX default frequency: R1 5658MhzVTX default power: 25mWReceiver firmware version: ELRS V3.4.3ESC firmware version: Bluejay V0.19.2Note: The VTX antenna must be in...
-
Manual for Micro TX V2 Module
Please check the attachment to download the User Manual for Micro TX V2 Module. Micro TX V2 Module--User Manual.pdf
-
Firmware for ELRS Micro TX V2 Module
Please kindly download the attached firmware for ELRS Micro TX V2 Module(Two versions). Note: Please assemble the antenna before powering on. Otherwise, the PA chip will be damaged permanently. N...
-
LiteRadio 4
Please see the LiteRadio 4 firmware file in the attachment.Updates: The RF module will no longer be activated at startup. It will be woken up and begin transmitting channel data only after the thro...
-
STL File for Pavo 25 V2 and Pavo 35
Please kindly download the attached STL file for Pavo 25 V2 and Pavo 35.
-
Manual for SMO 360
Introduction The SMO 360 is an ultralight 360 camera developed by BETAFPV using Insta360 technology. It is specially designed for the BETAFPV Pavo360 drone, which turns invisible, creating stunnin...
-
The base and surface shell for Module Adapter
-
How to Bind with F4 Betaflight FC (SPI ExpressLRS Receiver)
Here is the binding procedure for the F4 Betaflight FC (SPI ExpressLRS Receiver) This binding procedure could be used for the ELRS F4 1S 5A AIO FC and F4 1S 12A AIO V2.0 FC Binding Procedure There ...
-
Manual for Pavo20 Pro NightFire RGB Control Board
Please kindly check and download the attached User Manual for Pavo20 Pro NightFire RGB Control Board.
-
CLI for Toothpick F722 2-6S AIO Brushless Flight Controller 35A(ICM42688)
FC firmware suitable for USB flashing betaflight_4.3.0_STM32F7X2 Note: This is the official version of Betaflight 4.3.0, which needs to be used with the default CLI BTFL_cli_BETAFPVF722_ICM42688...