BETAFPV

  • Total activity 311
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 3 users
  • Votes 4
  • Subscriptions 187

Activity overview

Latest activity by BETAFPV
  • BETAFPV created an article,

    CLI For F4 1S AIO 5A FC(ELRS 2.4G)

    Note: Now the officially released Betaflight does not support SPI ELRS 2.4G receiver, so please use the following test version of the firmware, and use the corresponding configuration CLI. This CLI...

  • BETAFPV created an article,

    CLI For F4 1S AIO 12A FC(ELRS 2.4G V2.0)

    Note: Now the officially released Betaflight does not support SPI ELRS 2.4G receiver, so please use the following test version of the firmware, and use the corresponding configuration CLI. This CLI...

  • BETAFPV created an article,

    How to Flash Firmware of ELRS RX/TX

    The stock firmware of the Nano receiver and TX module manufactured by our company is ELRS V1.0.0-RC5 (the fifth release candidate version); ELRS Innovative team has officially released the first ma...

  • BETAFPV created an article,

    Firmware for 12A 1S ESC

    BLHeli Configurator and Bluejay Configurator do not support this firmware  (named Z_H_30_REV16_7.HEX) to download online for the moment.  Please load it local and flash it if needed. The fimware is...

  • BETAFPV created an article,

    CLI for HX115 LR

    This CLI can be used for F4 1S 12A PRO ELRS FC which is fit for Betaflight_4.2.X_BETAFPVF411 firmware. The picture and file name were marked as 1.   Please note, the file named BTFL_cli_HX115 LR_...

  • BETAFPV created an article,

    Manual for F4 12A 1S AIO Brushless FC

    This is the manual for F4 12A 1S AIO Brushless FC board.   ELRS 2.4G receiver version   SPI Frsky receiver version The stock firmware of these 2 board are betaflight_4.2.9_STM32F411.hex The Cli d...

  • BETAFPV created an article,

    How to Bind with External ExpressLRS Receiver

    How To Bind (No Binding Phrase) If your receiver and TX module didn't set the binding phrase from the ELRS configurator, the binding steps as shown below: 1. Power on and power off the receiver or...

  • BETAFPV created an article,

    Manual for Nano Receiver

  • BETAFPV created an article,

    Manual for Nano RF TX Module

  • BETAFPV created an article,

    Manual for Cetus FPV Kit

    Attached please kindly check the User Manual and Quick Start Guide for Cetus FPV Kit.