# 

# diff all

# version
# Betaflight / STM32F405 (S405) 4.5.0 Oct 26 2024 / 23:57:48 (c155f5830) MSP API: 1.46
# config rev: 6647698

# start the command batch
batch start

# reset configuration to default settings
defaults nosave

board_name BETAFPVF405
manufacturer_id BEFH
mcu_id 002e00453233511031373431
signature 

# name: Pavo20 Pro

# resources
resource LED_STRIP 1 A09
resource SERIAL_TX 1 NONE
resource SERIAL_RX 1 NONE

# feature
feature LED_STRIP
feature OSD

# serial
serial 3 131073 115200 57600 0 115200
serial 4 64 115200 57600 0 115200

# beacon
beacon RX_LOST
beacon RX_SET

# led
led 0 0,0::C:2
led 1 1,0::C:2
led 2 2,0::C:2
led 3 3,0::C:2
led 4 4,0::C:2
led 5 5,0::C:2
led 6 6,0::C:2
led 7 7,0::C:2
led 8 8,0::C:2
led 9 9,0::C:2
led 10 10,0::C:2
led 11 11,0::C:2
led 12 12,0::C:2
led 13 13,0::C:2
led 14 14,0::C:2
led 15 15,0::C:2
led 16 0,1::C:2
led 17 1,1::C:2
led 18 2,1::C:2
led 19 3,1::C:2
led 20 4,1::C:2
led 21 5,1::C:2
led 22 6,1::C:2
led 23 7,1::C:2
led 24 8,1::C:2
led 25 9,1::C:2
led 26 10,1::C:2
led 27 11,1::C:2
led 28 12,1::C:2
led 29 13,1::C:2
led 30 14,1::C:2
led 31 15,1::C:2
led 32 0,2::C:2
led 33 1,2::C:2
led 34 2,2::C:2
led 35 3,2::C:2
led 36 4,2::C:2
led 37 5,2::C:2
led 38 6,2::C:2

# aux
aux 0 0 0 1700 2100 0 0
aux 1 1 1 900 1300 0 0
aux 2 2 1 1300 1700 0 0
aux 3 13 2 1700 2100 0 0
aux 4 15 3 1700 2100 0 0
aux 5 35 2 1650 2100 0 0

# master
set gyro_lpf1_static_hz = 0
set gyro_lpf2_static_hz = 550
set dyn_notch_count = 1
set dyn_notch_q = 400
set dyn_notch_min_hz = 250
set dyn_notch_max_hz = 500
set gyro_lpf1_dyn_min_hz = 0
set acc_calibration = -2,-16,-27,1
set baro_hardware = AUTO
set max_check = 2000
set dshot_idle_value = 1000
set dshot_bidir = ON
set motor_pwm_protocol = DSHOT300
set motor_poles = 12
set motor_output_reordering = 2,3,0,1,4,5,6,7
set align_board_roll = 180
set vbat_max_cell_voltage = 440
set vbat_min_cell_voltage = 340
set ibata_scale = 510
set ibata_offset = -300
set small_angle = 180
set pid_process_denom = 2
set simplified_gyro_filter_multiplier = 110
set osd_vbat_pos = 2561
set osd_rssi_pos = 192
set osd_link_quality_pos = 2496
set osd_rsnr_pos = 160
set osd_tim_2_pos = 3629
set osd_flymode_pos = 3598
set osd_throttle_pos = 3566
set osd_crosshairs_pos = 2361
set osd_current_pos = 2592
set osd_mah_drawn_pos = 2625
set osd_craft_name_pos = 2582
set osd_warnings_pos = 14837
set osd_esc_tmp_pos = 129
set osd_core_temp_pos = 225
set debug_mode = GYRO_SCALED
set craft_name = Pavo20 Pro

profile 0

# profile 0
set dterm_lpf1_dyn_min_hz = 86
set dterm_lpf1_dyn_max_hz = 172
set dterm_lpf1_static_hz = 86
set dterm_lpf2_static_hz = 172
set anti_gravity_gain = 40
set p_pitch = 68
set i_pitch = 139
set d_pitch = 60
set f_pitch = 0
set p_roll = 54
set i_roll = 111
set d_roll = 44
set f_roll = 0
set p_yaw = 54
set i_yaw = 111
set f_yaw = 0
set d_min_roll = 44
set d_min_pitch = 60
set feedforward_averaging = 2_POINT
set feedforward_smooth_factor = 50
set simplified_master_multiplier = 115
set simplified_i_gain = 115
set simplified_d_gain = 130
set simplified_pi_gain = 105
set simplified_dmax_gain = 0
set simplified_feedforward_gain = 0
set simplified_pitch_d_gain = 120
set simplified_pitch_pi_gain = 120
set simplified_dterm_filter_multiplier = 115
set tpa_rate = 60
set tpa_breakpoint = 1250

profile 1

profile 2

profile 3

# restore original profile selection
profile 0

rateprofile 0

# rateprofile 0
set thr_mid = 65
set thr_expo = 20

rateprofile 1

rateprofile 2

rateprofile 3

# restore original rateprofile selection
rateprofile 0

# save configuration
save
#