Brushed Flight Controller - Betaflight

BETAFPV has a series brushed flight controller boards that power by Betaflight firmware, like F3 series and F4 series.

Manual for F4 Brushed FC (No RX)
Note: When you connect the receiver to 2s fc, please don't forget to plug the battery, otherwise the reciver will not work at all because if you don&#x...
Fri, 16 Aug, 2019 at 2:44 PM
Advanced Configuration Guide
The BETAFPV flight controller boards come pre-flashed with Betaflight firmware and proper settings already set up. Also if you upgrade the firmware or rese...
Thu, 22 Aug, 2019 at 3:09 PM
Receiver Configuration
This is a quick receiver configuration for BETAFPV F3 FC with OSD and no Rx integrated version. The external UART2 interface could support serial signal (li...
Wed, 7 Aug, 2019 at 2:27 PM
Manual for BetaFlight OSD Setup
Betaflight OSD (on screen display) is integrated in BETAFPV F3 brushed flight controllers that shows important flight data on your FPV monitor, such as batt...
Fri, 16 Aug, 2019 at 2:45 PM