Note:The contents of the vtxTable need to be setup manually only on betaflight 4.1.X firmware, in the old version, there is no need to set up. The SmartAudio is not available if the vtxTable parameter has not been set on Betaflight 4.1.X. (Shown as the below pic)

 

Reason for setting up VtxTable

As of Betaflight 4.1.0, band / channel and power level information needed to control videotransmitters is no longer hardcoded, but stored in a new facility called vtxTable.

The contents of the vtxTable need to be setup manually. They need to match the hardware, local laws and regulations, as well as user preferences.


How to set up VtxTable


In the CLI tab, input command: 


vtxtable bands 5
vtxtable channels 8
vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 5645 5885 5905 5925 5945
vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable powerlevels 4
vtxtable powervalues 0 1 2 3
vtxtable powerlabels 25 200 500 800

Save