Please note that if the HX100 is used the lastest version of F4 AIO 12A FC, you should flash following CLI.

Here is the pic of the differences among three versions of FC.


This Cli DIFF can be used for Betaflight_MATEKF411_3.5.3 on HX100 (For F4 AIO 12A FC V3.0)

name HX-100
feature LED_STRIP
beacon RX_LOST
beacon RX_SET
serial 0 2048 115200 57600 0 115200
serial 1 64 115200 57600 0 115200
led 0 0,0::A:0
led 1 1,0::A:0
led 2 2,0::L:0
led 3 3,0::L:0
mode_color 6 0 2
aux 0 0 0 1700 2100 0 0
aux 1 1 1 1300 1700 0 0
aux 2 2 1 1700 2100 0 0
aux 3 28 2 900 1300 0 0
aux 4 35 2 1700 2100 0 0
set serialrx_provider = SPEK2048
set acc_calibration = -67,-25,-324
set baro_hardware = NONE
set rssi_channel = 16
set motor_pwm_protocol = DSHOT600
set vbat_min_cell_voltage = 32
set vbat_warning_cell_voltage = 34
set ibata_scale = 580
set ibata_offset = 100
set yaw_motors_reversed = ON
set small_angle = 180
set pid_process_denom = 1
set osd_warn_batt_warning = OFF
set osd_warn_core_temp = OFF
set osd_vbat_pos = 2433
set osd_rssi_pos = 289
set osd_tim_2_pos = 2455
set osd_flymode_pos = 2425
set osd_throttle_pos = 2401
set osd_crosshairs_pos = 2253
set osd_current_pos = 2368
set osd_mah_drawn_pos = 2392
set osd_craft_name_pos = 2443
set vcd_video_system = NTSC
set spektrum_sat_bind = 9
save