This Cli DIFF can be used for Betaflight_MATEKF411_3.5.3 on Beta75X 3S whoop.

name X series
feature LED_STRIP
beacon RX_LOST
beacon RX_SET
map AETR1234
serial 0 2048 115200 57600 0 115200
serial 1 64 115200 57600 0 115200
led 0 0,0::A:0
led 1 1,0::A:0
led 2 2,0::L:0
led 3 3,0::L:0
mode_color 6 0 2
aux 0 0 0 1700 2100 0 0
aux 1 1 1 1300 1700 0 0
aux 2 2 1 1700 2100 0 0
aux 3 28 2 900 1300 0 0
aux 4 35 2 1700 2100 0 0
set acc_calibration = -67,-25,-324
set baro_hardware = NONE
set serialrx_provider = SBUS
set motor_pwm_protocol = DSHOT600
set vbat_min_cell_voltage = 32
set vbat_warning_cell_voltage = 34
set ibata_scale = 220
set yaw_motors_reversed = ON
set small_angle = 180
set pid_process_denom = 1
set osd_warn_batt_warning = OFF
set osd_warn_core_temp = OFF
set osd_vbat_pos = 2433
set osd_tim_2_pos = 2455
set osd_flymode_pos = 2425
set osd_throttle_pos = 2369
set osd_crosshairs_pos = 2253
set osd_current_pos = 2400
set osd_mah_drawn_pos = 2392
set osd_craft_name_pos = 2442
set vcd_video_system = NTSC
set iterm_relax = RPY
set iterm_limit = 500
set pidsum_limit = 1000
set pidsum_limit_yaw = 1000
set p_pitch = 52
set i_pitch = 45
set d_pitch = 31
set f_pitch = 71
set p_roll = 52
set i_roll = 51
set d_roll = 31
set f_roll = 71
set p_yaw = 78
set i_yaw = 57
set f_yaw = 75
save